The quality of people's days has been improved, decoration and decoration have received more and more attention. Ceramic processing has become more and more manufacturers of ceramic storage system equipment. There are generally two main types of ceramic processing equipment: ceramic arc machine, another Kinds are ceramic cutting machines, two of which are commonly used in two types of ceramic stock system equipment. Before the application of ceramic materials; the quality of ceramics depends to a large extent on the quality of raw materials, so ceramic materials must be inspected in the production process workshop before they can be put into use. The added material has a foundation of mud and chemical materials.

       Material to brick composition process; qualified ceramic materials will be officially put into production. One production process is grinding ball pulping, and the general ball milling time is about 12 hours. The longer the ball milling time, the finer the particles. Then, the mixer was stirred successively, and the stirred slurry was atomized into fine droplets, which were then evaporated into a powder. The powder is produced and can be produced at any time and pressed into a brick by a press. However, the actual specification of the brick that is usually extruded is larger than the gauge size because the ceramic is shortened during the firing process.

      The general shape of ceramic bricks from brick to product process bricks has ended, but the products require a series of processes. Since the water content of the brick passing through the press is relatively high, it is assumed that the direct glaze printing is incinerated into the kiln, which is a simple defect that causes the tile to be split. Thus, ceramic stock systems are required to be dried in a monotonic kiln to achieve a satisfactory moisture content.