Foshan Mingxie Precision Machinery Co., Ltd.
TEL：0757-28101119 / 28789631 / 28789632
Website ： en.fsmingxie.com
ADD：No.6 Wisteria Road No.2 Industrial Park, Yanghe Town, Gaoming District, Foshan City
With the continuous development and improvement of the social level and the continuous improvement and advancement of production technology, the application of the ceramic arc machine in life can be described as extremely extensive. When the blade of the ceramic arc machine is suddenly broken, or the blade collapses, what causes the blade of the ceramic arc machine to collapse?
The quality of the blade: the quality of the blade is the root cause of the chipping. The blade with poor quality can not hold the working environment for a long time. Therefore, the quality of the blade of the ceramic arc machine should be selected. For the blade, you can view the information of the ceramic machine in the ceramic arc machine blade. The ceramic arc machine can not directly force the ceramic hard operation during the operation, and the balance of the blade should be controlled, because it will cause the blade to collide with the ceramic and cause the blade to collapse or bend.
Internal reason of ceramic arc machine: In the accumulation of ceramic machinery for several years, the quality of the blade is often very good, but the blade will still collapse, and then we find the problem, in fact, this is due to an internal reason, because the bearing is damaged. The result is the instability of the time-sharing blade that causes the rotary start. The solution is to completely replace the new bearing. The looseness of the table on the table of the ceramic arc machine or the screw on the motor will also cause the blade to vibrate during the application process. This is similar to the reason of the previous one. This solution uses a screwdriver to see which screw causes the loose tightening.